trevg
Most of the commonly reported issues and questions are answered in the Frequently Asked Questions (FAQ) option under the Support menu of this website.
*** PLEASE NOTE ***
Your forum account is not the same as the account used in the shop. They are completely separate accounts.
Your forum account is not the same as the account used in the shop. They are completely separate accounts.
1st December: A new version of the GoFlight Interface Tool for MSFS is now available.
12th November: A new version of the GoFlight Interface Tool for X-Plane is now available.
6th June: A new version of Virtual Flight Sim Hardware is now available (huge update)
21st November: A new version of the GoFlight Interface Tool for FSX/FSXSE/P3D is now available.
trevg
Comments
-
Disable the XHCI allows the USB 3.0 hubs to run as backward compatible USB hubs. New Mother boards mainly have USB's 3.0 like mine and only 2 older compatible ports, not good to daisy chain everything off just the 2 ports.. Thanks Steve, made my day, GFWindows8Fixer.cmd did the trick !!!!!! Cheers
-
My update for my machine. X-plane, latest beta. Win 10. 20 GF modules and using your 0_1_2_0 beta. Dug out my old FSX back up and reloaded. Were using Win7 but had a load of troubles and figured easier to try Win10 than go thru the performance of reloading Win7 from scratch. Win10 loaded great, runs great, didn't need to…
-
Very glad you had a very good sleep the other night Steve. You are our only chance of getting our GF equipment working with add on aircraft. Keep up the good work it is much appreciated. Cheers Trevor
-
Hi Steve, wish you all the best for 2016. Are you still working on the X-Plane version ?
-
Thanks Steve, I'll stop bashing my head against the wall......
-
Further to my above problem. When I get the GoFlight interface has stopped working box. The following is in there, if this is any help. Something I have missing somewhere. Problem signature: Problem Event Name: CLR20r3 Problem Signature 01: GoFlight Interface Tool X-Plane Problem Signature 02: 0.1.1.0 Problem Signature 03:…
-
Downloaded twice, loaded both GFConfigSetup_2_25_2 and GoFlightInterfaceTool_SetupX-Plane_0_1_2_0 - BETA Both installed in the same directory GoFlight. Programme finds Go flight and x-plane with green lights also finds the aircraft I am flying but have a flashing red light in the aircraft column and crashes with type…
-
Ok Steve, Stuck it back in, have the same message in the log as I got the previous time they went walkabout. Bunch of Simconnect exception received: event_ID_Duplicate's then the line Simconnect:exception received: Name_Unrecognised Next and last line normal. Synchronising switches and Selectors complete All units work…
-
Sorry Steve never looked.
-
Hi Mark, Same problem from day 1 (years ago) I labelled all leads so I make sure they get plugged back into the same USB ports. As mentioned only effects where you have multiple same units. Yes, have tried "all" suggested remedies to no avail over 3 dedicated flight machines over the years. Cheers Trevor
-
Hi Steve, I have the PMDG interface working with above GIT. One thing I have noticed I think it was the same before when it was stand alone interface. Using the T8 for Taxi light is ok, when I add the Position and Strobe switches I have a wee problem. Taxi light switch uses DATA_BTMOH_ LTS_SWITCH_TAXI (which works, light…
-
Ta Steve, Glad some of my problems help :)>-
-
FSX Steve and DX10 on win7 64 bit. Cheers Trevor
-
No worry Steve, I don't use the levers just the buttons. Think is what you wanted. Cheers Trevor
-
G'Day Steve, Checked the other thread, no help. I am using the GF-TQ6 basic unit. Are in the virtual cockpit, both GoFlight and FSUIPC will control the levers/buttons ok. Still greyed out with no access in the interface. Log read everything down to the lines simconnect: event duplicate (about 4 of them) next line read…
-
Steve, TQ6 shows as 1 on the status page. All entries in Goflight TQ6 are disabled FSUIPC knows it is in the system and can programme it, it's clear at the moment nothing is programmed . I don't actually use the throttles but use the 4 buttons of the TQ6, the throttle and mixture are used with FSUIPC using CH throttles. If…
-
Quickie Steve I forgot to add. My GF-TQ6 is greyed out, I understood this had been added recently. Cheers Trevor
-
Hi Steve, Brilliant, skipped your 332 and went straight to 345. Everything as predicted Technically, when the Avionics Master is turned off the digits should go out. What happens is that they go out after the Master Battery is turned off. One little hiccup is when the master battery is turned on again the GF-MCP is working…
-
I must not swear, I must not swear, I must not swear, I must not swear Thought I would try it out on my old FSX an old machine no GoFlight stuff on it -------FSX Drive kaput !!!!! Plan B Fired up flying machine and reloaded old GoFlight Cessna files GF-MCP advanced works perfect Alt hold button pushed many times and never…
-
Hi Steve, My setup, if I click on the hold button in the vc it has never altered the pre entered data in any of my aircraft using the GF -MCP. I would normally load say 2500 ft fly then de-activate hold, climb over saddle or go down and investigated a town, push the hold and resume at previous setting 2500 ft I'll go back…
-
G'Day Steve, 2.0.329.0 loaded and LED on Alt hold button now ok but still have problem with the displays. When I activate the Alt hold button the Alt window reading drops now to 300 and the VS window reverts back to Zero.
-
Hi Steve, now using 2.0327.0 in FSX, had another play tonight. PDMG 737 working great with it. Back to MS Cessna 172 set up. Doing the straight MCP unit with FSX defaults set. Everything works except for the Alt button. input = on, AP_ALT_HOLD Nothing Light display= AUTOPILOT_ATTITUDE_HOLD Light Display = ON Value = 1…
-
Thanks Steve, I were pulling my hair out in vain after all, I thought I would start with a basic common Microsoft aircraft and basic switch to start with. May have to reorganise setup for button instead of switch. Cheers Trevor