Built In Events are Events built into the software to provide useful functionality.
_NONE
This event signifies that no Event should be sent.
_CYCLE_DISPLAY_BACKWARDS & _CYCLE_DISPLAY_FORWARDS
On Component Displays that cycle, these Events can be used to cycle the available options backwards and forwards. The Component Display will need to be connected to the Components that will send these Events, i.e. two Push Buttons.
_SET_STATE_TO_0 ..... _SET_STATE_TO_9
On Component Displays that cycle, these Events can be used to force the Component Display to show a particular option. The Component Display will need to be connected to the Components that will send these Events, i.e. a series of Push Buttons or a Selector.
_SPIN_DATA
This Event is designed for use on a Component Rotary and increases or decreases the associated Variable/Datarefs value by the rotation amount.
The Event Custom Value can be set to act as a multiplier, otherwise the multiplier is 1. The multiplier is multiplied with the rotation amount to increase the amount the associated Variable/Datarefs value is changed.
The Data Custom Values can be set to enforce a minimum and maximum value of the Variable/Dataref. The first in the minimum and the second is the maximum.
_TOGGLE_GESTURES_ENABLED_ON_LINKED_COMPONENTS
This Event will toggle "Gestures Enabled" between 3 or more connected Components.
It's useful when you have Components sitting on top of each other, where it becomes difficult to interact with the Components underneath the others. E.g. You can connect a Component Push Button to two or more different Components that are stacked on top of each and the Component Push Button can be assigned this Event to cycle "Gestures Enabled".
When building, only one of the stacked connected Components must have its Gestures enabled, the others must have them disabled. The Component assigned this Event must also have its Gestures enabled.
_SLIDER_VALUE_TO_BESPOKE_VAR
This Event will put a Slider Components current positional value into a Bespoke Var using the Custom Value as the Bespoke Var index. E.g. A Custom Value of 99 would put the Slider Components positional value into Bespoke Var 99. This is useful for when you need to implement a more complex approach via Lua than the simple built in conversion for handling Slider inputs.