Light action between values

Answers

• admin_pps

  November 2017

  Hi Alex,
  
  No you would need to build a bespoke event or if necessary the Start bespoke event and assign the result to a Bespoke Variable.
  Lua is also an option.
  
  Best wishes
  Steve
• musicflieger

  November 2017

  Hi Steve,
  
  thanks for your answer. This sounds quite clear to me, fact is that I have no idea what a BE of this should look like.
  I really don´t want to appear like a stupid sticky guy but could you please give me some hints to build this needed BE?
  
  For the moment I am so very happy that I could manage almost all of my actual needs, that I´ve ordered a bunch of additional GoFlights and a DIO board for my future O/H panel.
  
  Greetings
  Alex
  
  P.S. Have you monitored x-plane.org forum yet? Some people there really try to keep others from using GIT! Don´t know why, but I "have no admission to post comments"... although I am registered there.
  
  
• admin_pps

  November 2017 edited November 2017 Answer ✓

  Lua would probably be easier. Something like:
  
  dRefVal = getdref("your dataref name here")
  
  if (dRefVal > 10 and dRefVal < 50) then
  setbvar("BespokeVar0", 1)
  else
  setbvar("BespokeVar0", 0)
  end
  
  Alter the text in italics to match your needs.
  
  dRefVal is a local lua variable that will store the contents of the dataref value.
  The if statement check the value to see if it is between 10 or 50 and if so sets the BespokeVar0 to 1, otherwise it is set to 0.
  You assign the Lua file to one of your controls and then assign the LightData as the "Bespoke Var 0" with a ON if 1.
  
  If the dataref changes on its own without anything needing to be pressed in the cockpit, such as "altitude", then add the code to the global aircraft lua file and add a sleep(50) command at the end.
  
  Yes, I have looked at the forum, its the bunch of people that couldn't grasp how to use the tool - not a lot I can do about it. I need people to post positive messages for me.
  
  Best wishes
  Steve
  
  
  
  
• musicflieger

  November 2017

  Thanks a lot Steve...
  
  for the prog example! Appreciate your help very much!
  
  When my programming of GIT is complete I'll try to find out how I can get enabled to post in xpl.org. People need to know that there's a great solution for all their cockpit needs!
  
  Greetings from snowy Austria
  Alex
• admin_pps

  November 2017

  Had a though this morning. If you do use the global lua, you would need to wrap the code in a loop so it runs continuously. Something like:
  
  while true do
  dRefVal = getdref("your dataref name here")
  
  if (dRefVal > 10 and dRefVal < 50) then
  setbvar("BespokeVar0", 1)
  else
  setbvar("BespokeVar0", 0)
  end
  
  sleep(50)
  
  end
  
• musicflieger

  November 2017

  Hello Steve,
  
  thank you very much for all the assistence you give!
  I will try my best as soon as I find some time... my job´s killing me right now.
  Keep you informed,
  
  Alex