New GoFlight Interface Tool

tosco92 · November 2017

Hi guys, I bought a goflight mcp and installed GoFlight Interface Tool, okay, I also find the goflight window in the simulator. when I start up the GoFlight Interface Tool to use the panel with a pmdg it starts charging and then hangs with green light for simconnect and the other two are red and i can not do anything. why?

admin_pps · November 2017

Have you installed GIT into the same directory as the GoFlight drivers? If not, you will need to copy GfDev.dll from the GoFlight drivers into the GIT directory.

Best wishes
Steve

tosco92 · November 2017

you now do but the simconnect ball is yellow and the last is flashing green

admin_pps · November 2017

That's OK, a yellow light simply indicates an exception had occurred and is usually nothing to worry about.

tosco92 · November 2017

so okay? can I use them so or should I do something?

admin_pps · November 2017

Yes, that's fine. Just enable the devices on the GIT tab, configure if necessary and then quit and restart GIT and it should all be OK.

tosco92 · November 2017

unlike the 777 that with mcp it all goes to green balls and so goes perfectly, with the 737 pmdg I always remain the yellow yellow ball but to go to work, the only thing is the track wheel that if it goes goes by the numbers what does he think, how come?

admin_pps · November 2017

I don't understand what you are saying about the track wheel?!

Best wishes
Steve

tosco92 · November 2017

I meant that the button of the course works badly, so many numbers jump

admin_pps · November 2017

It sounds like a faulty rotatory encoder in the MCP. Download the GoFlight MCP PRO test tool and check it works OK: https://www.dropbox.com/s/n1hw4huebtuwgqz/MCPProChkA25.zip?dl=0

Best wishes
Steve

tosco92 · November 2017

it goes wrong, I used the program and under the heading Course the cursor when the lap is always right, however bad. how can I do? thank you

admin_pps · November 2017

Your rotary encoder needs replacing. GoFlight can do it or ship you a part and you or someone else can fix it.

Best wishes
Steve

tosco92 · November 2017

so is it safe to change?

admin_pps · November 2017

I have never done it. Contact GoFlight.

Best wishes
Steve

tosco92 · November 2017

ok thanks

tosco92 · November 2017

it is the only solution?

admin_pps · November 2017

I would try them first to confirm the problem.

tosco92 · November 2017

How?

admin_pps · November 2017

https://goflightinc.com/support/

New GoFlight Interface Tool

Comments