Problems using XP11.50 with Zibo 737 - MCPPRO

DAFO1711

Good morning, wonder whether someone could support please. Just purchased 2nd hand MCPPRO which I think is loaded with A22.
Most controls work fine with the exception of the VS dial and the course selector, both left and right. I've downloaded the zibo files and ran the import wizard.
Also using EFIS and 2 x GF166's with no issues, just the couple of problems with the MCPPRO. Would really appreciate any advice or recommendations.

Also , not sure if I need the latest Goflight drivers, but if I do the link is dead.

Cheers, Dave

DAFO1711

Sorry, I should add... the problem being that whilst the course selector and vs dial are recognised, both are erratic and appear to jump up and down in value with the slightest of movement on the MCPPRO. Thanks

admin_pps

Sounds like the rotary encoders are worn out. Use this GoFlight test tool to check: https://www.dropbox.com/s/n1hw4huebtuwgqz/MCPProChkA25.zip?dl=0

Best wishes
Steve

DAFO1711

Steve, thanks. Downloaded and there is an entry for each encoder but its sporadic - jumps around. Problem also with some LED's lighting some of the time, not others. But whenever I press a button - the MCP on the virtual cockpit responds correctly. i.e. if I press VORLOC , the virtual MCP reacts but the LED doesn't always light on the GF MCPPRO. When I attempted to downloaded the latest drivers from this site- I get a dead link - any ideas ?

Thanks for your support, Dave

admin_pps

https://goflightinc.com/client_services/latest-software/

VBV001

admin_pps said:

https://goflightinc.com/client_services/latest-software/

Goodmorning,

When I click the link I get Nothing found. Just started with the software and I run in some problems and want to try to
solve it with the drivers.

Anybody who can help me.

Thank you,

Regards,

Cor

VBV001

Good afternoon,

Not needed anymore. Got it trough somebody in the VA.

regards and have a better 2021

Cor