Martin1210
Most of the commonly reported issues and questions are answered in the Frequently Asked Questions (FAQ) option under the Support menu of this website.
*** PLEASE NOTE ***
Your forum account is not the same as the account used in the shop. They are completely separate accounts.
Your forum account is not the same as the account used in the shop. They are completely separate accounts.
1st December: A new version of the GoFlight Interface Tool for MSFS is now available.
12th November: A new version of the GoFlight Interface Tool for X-Plane is now available.
6th June: A new version of Virtual Flight Sim Hardware is now available (huge update)
21st November: A new version of the GoFlight Interface Tool for FSX/FSXSE/P3D is now available.
Martin1210
Comments
-
Hi, I'm using Windows 10 Pro (German), P3Dv3, GIT 2.3.0.0 and Goflight driver 2.26 Build 4. I attached again my files of GIT from the documents folder. regards, Martin
-
Another info: After I imported the MCPPRO.xml it works and if I press the Button "Restart" in GIT it doesn't work and the heading problem is there.
-
One question. In detective I only must import "mjc8q400.xml"? The "mjc8q400 Vars.xml" is not necessary?
-
No sorry, it doesn't work. The same problem. Also I tried to start GIT first and then P3D and the Dash. I must load the "mjc8q400_GFMCPPRO-0.xml" everytime after loading the Dash. It doesn't matter wether I start GIT before P3D or after. Another thing I noticed. After loaded the Dash and GIT the digits for Altitude count…
-
You mean, deleting the GIT folder at documents? Right? Not deinstalling GIT? Normally I start P3D, load the plane I want to fly and start GIT. Leaving GIT active and switching between planes and I switch from the A2A C182 to the Dash I got those failures, I showed in the screenshot above. At the moment I have time and test…
-
I deleted the bespoke events in detective and imported your new one. But if I quit GIT and load it again the same problems appear. I have to import the MCPPRO.xml again, the it works. Tomorrow I test deleting the complete GIT folder in documents. GIT forgets the settings only for MCPPRO. EFIS work without problems.
-
I renamed your file to "BespokeEvents.xml" and saved it to the documents folder. Start P3D, load the Dash and if I start GIT the HDG digits of the MCPPRO show 000. If I turn CCW 359, 358, 357,... from 000 CW 010, 020, 030,... If I import the "mjc8q400_GFMCPPRO-0.xml" file the digits work. If I close GIT (not P3D) and start…
-
Hi Steve, is this file the BespokeEvents.xml? How should I import this file? I copied it to my dokuments folder but it doesn't work. Regards, Martin
-
Hi Steve, that's very nice if could have a look at my settings. I attached my xml files in the zip. The only planes I use with my MCPPRO and EFIS, are A2A C172, 182, Piper Cherokee, Comanche and the MJC Dash. The PMDG 737NG and 777 are built in GIT. Thanks a lot! Martin
-
Hi Steve, I deinstalled GIT and the GoFlight drivers, reboot, install both in a new folder at another harddisk, deleted the GIT folder at My Documents. Now I installed the bespoke events in detective and imported the xml for MCPPRO and EFIS. It works, but if I close GIT and P3D and start again, the problem I wrote above…
-
Now I'm running GIT as administrator. Next I'll try to deactivate UAC (I'm using Win10 Pro 64-bit). At the moment I start P3D, load up the Dash and then start GIT (as admin). The digits at the MCP Pro HDG are showing 000. If I turn CCW the digits go down 359, 358, 357... If I turn CW the digits are going up 010, 020,…
-
Now I think I can reproduce this problem. I loaded the A2A C172, 182 and if I load the MJC I get those failures I showed this screenshot. Then I have those events twice at the detective. Then I can't delete the Bespoke events with the red X, although the events are there. Also it seems that I have to import the MCP Pro…
-
I already deleted the Goflight Interface Tool folder in documents, started GIT and imported the profile. That's interesting. I noticed that I must import the XML for the MCP Pro everytime I start GIT new. I'm testing now to run GIT as admin and let you know. Thank you for your patience.
-
Hi Steve, I deinstalled the Goflight Driver and GIT. Installed Goflight Driver 2.26 Build 4 and GIT 2.3.0.0. Started P3Dv3.2, loaded the Dash (Pro) and startet GIT. Open Detective. Clicked the red X to delete the Bespoke Events. Closed GIT, startet it again and imported your new version. Unfortunately this also didn't…
-
Sorry, I did it this way but it doesn't work... If I turn HDG CCW from 000 there are 990, 980, CW I can rotate with normal steps, 000, 001, 002 and so on. This slow value increasing would not be a problem for me, but in one direction there steps with 10 and the other direction there are those 900 values.
-
Hello, I was off PC the last days. Now I'm downloading the new GoFlight drivers and install them after deinstalling the old one. Steve (Slayer) where I can download your new profile? Is it the link at the download page? How I must deinstall the old profile? Only press the "X" button in detective and install the new files?…
-
Thank you Steve! Again I deleted the user config files and installed my bespoke events again. Before I bought the actual GIT and now it works, but I don't know what happened. One problem with the MJC Dash is left. If I turn the rotaries HDG and Course at the MCP Pro clockwise the digits count up from 000 to 360 and then to…
-
Could I messed up something because I changed from a A2A C182 directly to the Dash without quitting GIT and/or P3D?
-
This my detective looks like. How I can delete all bespoke events? This red x isn't available. A few days ago I imported the xml files twice and had doubled entries. Then I deleted the 3 xml Userdata files under Documents\GIT an importet the MJC files. At this moment all worked without a problem. After switching between 2…
-
Many thanks for the profile of Majestic Dash 8. I installed it and one time it works great. Then suddenly I get error messages for every event "The Event "MJC_EFCP1_BRG2_VOR1" has Errored: System.ArgumentOutOfRangeException...." Since this time the MCP Pro and EFIS don't work anymore. Do you have an idea how I can fix this…
-
Hi Steve, luckily I have not such OOMs at start of P3Dv3.1. But I'm not sure from where my OOM's after longer flights come. I'm using P3D settings from Rob Ainscough http://www.robainscough.com/Prepar3D_V3.html and after longer flights I'm getting OOM's. Rob does not have this problem with OOMs. Also I use FS Commander…
-
At the GoFlight Webseite there is GF-Config 2.26.1, but if I download this version there is Version 2.2.6, Build 0. Is this correct? Regards, Martin
-
Hi Steve, thank you in advance. I'm using the same setup for P3Dv2.5 with the A2A planes, but in P3Dv3 I can move the gauges at the plane, but the displays at the MCP Pro did not synchronize and show "0". Sorry that I could not solve this problem on my own. Best wishes, Martin
-
Hi, I'm using now P3Dv3 with GIT 2.1.16.0 and have a problem with the A2A planes. The MCP Pro Rotaries are working in the plane, but the digits at the MCP doesn't work. They only show zeros. In P3Dv2.5 the MCP Pro work without problems. Regards, Martin
-
Oh, this line I've not seen. Now it works great! Many thanks, Martin
-
GIT and GoFlight Drivers are installed "C:\Program Files (x86)\GoFlight" The same directory the FSX Version was installed. My dll.xml is: <?xml version="1.0" encoding="Windows-1252"?> <SimBase.Document Type="Launch" version="1,0"> <Descr>Launch</Descr> <Filename>dll.xml</Filename> <Disabled>False</Disabled>…
-
Hi Steve, I think you are right. It looks like this problem with the C172 occurs since the last Accusim Core Update. The C182 (Heading, Altitude) works without problems if I set the MCP Pro to "Default". At the Cherokee I can use the file for the C172 (MCP Pro set to "compatible" and the Heading sync is correct. Only with…
-
Hi Steve, thank you for your quick answer. I am happy that there will be new files for the A2A C182 and other planes. Unfortunately I have now a problem with the A2A C172 and the MCP Pro. If I load the C172 and then start GIT, the Heading Bug is set 90 degrees wrong. For example if I set course 000 on the MCP I get 090…
-
Thank you very much for this info. I hope Majestic will share those informations some day. Regards, Martin
-
Sorry, but since July there is nobody who can answer my question? Is there nobody who fly the Majestic Dash with a GF MCP Pro? Regards,Martin