Martin1210
Most of the commonly reported issues and questions are answered in the Frequently Asked Questions (FAQ) option under the Support menu of this website.
*** PLEASE NOTE ***
Your forum account is not the same as the account used in the shop. They are completely separate accounts.
Your forum account is not the same as the account used in the shop. They are completely separate accounts.
1st December: A new version of the GoFlight Interface Tool for MSFS is now available.
12th November: A new version of the GoFlight Interface Tool for X-Plane is now available.
6th June: A new version of Virtual Flight Sim Hardware is now available (huge update)
21st November: A new version of the GoFlight Interface Tool for FSX/FSXSE/P3D is now available.
Martin1210
Comments
-
Thank you very much, Steve! :) Works now great. Best wishes, Martin
-
Oh, Steve, thank you for checking. If so it would be great you make a new version. Best regards, Martin
-
I don't know. At the known issues at working title I read "If you use third party software to control your panel, you can specify to read from AUTOPILOT_ALTITUDE_LOCK_VAR_1 instead of from AUTOPILOT_ALTITUDE_LOCK_VAR". At the working title discord I saw that this variable should be "AUTOPILOT_ALTITUDE_LOCK_VAR:1" I you use…
-
I have bought MSFS at the MS Store but installed it on another HD. If I install the store version I have to put the "pollypotsoftware-flightsimio-module" in my Community folder. This way GIT works. It's a little misleading, as there is no readme that the module must be downloaded and copied to the Community folder. Thank…
-
For me the new version 4.4.0.0 doesn't work. If I start GIT the Simconnect light is yellow and no module is loaded. The log says: 22:23:44 GoFlight Connection Starting..... 22:23:44 SimConnect Connection Starting..... 22:23:45 SimConnect Message Processing Started 22:23:45 GoFlight Connection Started 22:23:45 SimConnect…
-
Hi Francesco, thank you for your effort. heading works (without the displays), but altitude doesn't work. Which MCP-Pro buttons/rotaries should work? Regards, Martin
-
Good question. I want to program the knobs of my RP48 for some G1000 functions, but this doesn't work. Is this possible?
-
And after I deleted all settings (in documents), which I created with the first version of GIT, the new settings I created will not be saved. Regards, Martin
-
I started MSFS and loaded the flight. Now I start GIT and all is working great. But if I close GIT, I get this message "object reference not set to an instance of an object", then I click "ok" and GIT closes. But the digits of the MCP-Pro and LEDs at the LGTII are illuminated and don't extinguish.
-
Thank you Steve. I only had setup my MCP-Pro, Efis, SECM and LGTII. I start MSFS first, load the flight and then start GIT. Everything is working ok. Only if I quit GIT, this error message appears. Should I delete some files in my Documents folder?. Best regards, Martin
-
Thank's Ray, I tested, but last flight my SECM stopped working. Now I get the attached message. This message I got since a few weeks and I clicked on "Ok". Maybe this is the reason for my problems? How I can solve this problem without deleting the whole GIT config? Cheers, Martin
-
Thank you Ray, the last time I already tried to swap the ports of some other GF modules with the MCP-Pro and only the MCP freezes at every port. Even at a direct USB 2.0 port of the PC. So maybe it is a problem of the MCP. Now I unplugged all USB devices and run the Windows8Fixer. This Fixer I found in the package, after I…
-
Thank you Ray, but now I plugged the MCP Pro direct to the USB 2.0 port of my PC. Again after 45 minutes the rotaries and buttons don't work. If I want to close GIT this doesn't work until I unplug the MCP Pro (then it close). All other GF modules (EFIS) are working. After the new start of GIT the MCP Pro works only 15…
-
Ok, but one interesting thing is, that I only have this problem with the MCP Pro and the zibo 737. If I use any other plane with the MCP Pro, I can fly hours and the MCP Pro did not freeze. Maybe this problem could also be caused through my old GoFlight modules? I have a GF-45, P8, RP48 and T8 which have black panels. I…
-
Ok, I'll contact RayProudfoot for the hubs. Now I have the new hubs and the same problem. I make a 3 hours flight with the latest zibo and the profile from steve. I have unchecked the power management at all devices and after 1 hour flight the MCP Pro freezes. The digits are freezed and if I turn the rotaries or use the…
-
Hi Steve, I've bought 2 new USB Hubs and checked the power management again. So I found 2 or 3 devices, where the power management settings were wrong. I think the last Win10 update is the cause. I have 11 devices (GoFlight and Throttles) which I first connected to one 11 port Hub. This hub have its own power supply, but…
-
Steve, hold on. I'm so sorry. This moment, as I set the Bespoke event in the EFIS Tab I saw a command called a320/Panel/InstBaroMode. This one I didn't notice until now. If I set this one to ON and OFF, the knob works like expected. :/ I don't wanted to get on your nerves. Now all my problems with Zibo B738 and FF A320 are…
-
Ok, I set this Bespoke Event to the EFIS Baro knob (input event) ON. If I push the knob the value goes to -1 (STD) and if I release the knob, back to 1 (NORMAL).
-
At the moment the button only goes to -1 and then 0 with every press of the baro button.
-
Hello Steve, I don't have Bespoke Var 0. Do you mean 7?
-
We are on the right way. It works, but if I press the Baro knob at the EFIS the setting change to STD (-1) but the value goes back to Normal (1) until I release the knob.
-
Sorry, where I select "Bespoke Var 0"? In the upper window under "Bes Vars" there is no Bespoke Var 0. Only 7, 9, 10.
-
How I put in "Switch Bespoke Var 0"? With the "Switch" button there is the highlighted variable (a320/panel...)
-
With Set a320/Panel/EFIS_BaroModeL -1 Sleep 500 Set a320/Panel/EFIS_BaroModeL 0 the knob works. Last problem is to set the two commands alternatley to the one push function of the EFIS Baro knob. This switch command doesn't work.
-
Datarefs, commands FF A320
-
Hello Steve, as there was a normal command in the B738, I had a look at the A320. There are also normal commands for the baro. But those I didn't found in detective. And as there are to different commands I have to set it in one push at the baro knob from EFIS. This I also do with the "switch" command? I found the datarefs…
-
This was it! :) Many thanks, Steve! Best wishes, Martin
-
Yes, but there is only laminar/b738/toggle_switch/position_light_up and down and with this ones the switch moves only one tick up and down. At the moment I use the flap switch of the SECM, because this is a up and down switch and I can use the above command. I move the switch 2 times up or down. The normal switches only…
-
And those commands doesn't work. I tried them again. I'm using the Aircraft config from David Williams for MCP-Pro and EFIS. This could not be an issue? I found out, if I use laminar/b738/toggle_switch/position_light_up and down the switch in the cockpit work, but only one step up and down. Down position is STEADY, middle…
-
Oh, sorry!