geronimopilot
Most of the commonly reported issues and questions are answered in the Frequently Asked Questions (FAQ) option under the Support menu of this website.
*** PLEASE NOTE ***
Your forum account is not the same as the account used in the shop. They are completely separate accounts.
Your forum account is not the same as the account used in the shop. They are completely separate accounts.
1st December: A new version of the GoFlight Interface Tool for MSFS is now available.
12th November: A new version of the GoFlight Interface Tool for X-Plane is now available.
6th June: A new version of Virtual Flight Sim Hardware is now available (huge update)
21st November: A new version of the GoFlight Interface Tool for FSX/FSXSE/P3D is now available.
geronimopilot
Comments
-
Ok will do.....I will do that when I get home after work. I believe you are 6-7 hours ahead of me here..... thanks again Steve.... Scott
-
I have opened up the case and verified that the USB hubs are in fact 2.0....the leads do go directly to 2.0 pins on the Motherboard....I will check BIOS...can you tell me what I should be looking for in there? Thanks Steve.....
-
Yes...do you think there is a way to rectify my situation?
-
Steve, Here is the official word from Tony at Goflight: "Hello Scott, Apologies for the late reply. For the test software, to interpret it – if the test software shows that signals are being sent, then we know that the modules themselves are fine and the problems lie within the software of the computer. To see if the test…
-
Thanks Steve.....
-
Steve you mentioned in that other email CMD/Write sliders......what do those do and are they there in WIN 10? Scott
-
Steve/Dave, I am returning the 3 previous USB 2.0 powered hubs I purchased and purchased the hubs that were recommended in your last email by klosurdo - that is the Plugable brand hubs. They will be here Thursday. Scott
-
Dave here is my screenshot: As you can see all four units appear....that is what is so baffling.. Scott
-
Noted and understood Steve you have been outstanding and have gone up and beyond the call of duty and I appreciate that! I have followed your instructions to the tee and tried to do so many times as to not make a mistake...I do not understand why all is not working. Sometimes it all seems to work then the next time I…
-
Well Steve I have given this project all I can....it is my opinion that Goflight & the GIT has to be to be the worst experience so far in my build and it is obvious to me the it will never work as it once did in WIN 7...nothing has worked....what a waste of time and 800.00USD. Goflight could give one rip about X-Plane and…
-
Steve, I have disappointing news...just spent 60 bucks on USB 2.0 powered hubs and things went from bad to worse. Nothing works at all.... or intermittent at best. Goflight has not responded either - very poor customer service. I am thinking I will try one last thing that being the most recent GIT version. Very…
-
Hi Steve, Hubs arrived today...I'll plug all units into separate powered hubs when I get home from work ; ) Say do you think it matters what version of GIT I use? Been using 1.8....thought that might have been causing my issues....if not I will go to the latest version...what is that now 1.9? Thanks again, Scott
-
Thanks Steve....I don't want to jump to conclusions but maybe, just maybe the GF-166's might be working properly. However, the only way I can get the GF-46 to "come to life" is to unplug the unit, and plug it back in while in X-Plane 11. I am taking your advice and I ordered 3 more USB 2.0 powered hubs so each unit will be…
-
Steve here is my GIT log: 19:49:12 GoFlight Connection Starting..... 19:49:12 X-Plane Connection Starting..... 19:49:13 GoFlight Connection Started 19:49:15 GIP: Pipe Connect Failed! 19:49:18 GIP: Pipe Connect Failed! 19:49:21 GIP: Pipe Connect Failed! 19:49:24 GIP: Pipe Connect Failed! 19:49:27 GIP: Pipe Connect Failed!…
-
Yikes for some reason unbeknownst to mankind my new motherboard gave up its ghost....Michael at Xforce PC sales gladly replaced it as well as the video graphics card etc.. so Steve, nothing should have changed right? So it plugged all back in and again nothing works....with the exception possibly one of my GF166's. To the…
-
I got 3 out of the 4 radios working..... the 166's work fine but the GF46 won't light at all - not even when pushing "identify". When I unplug the unit, I hear the WIN 10 chime sound off and it does the same when I plug it back in so the computer is recognizing it.... please help. Thanks, Scott
-
Thanks Guys...I'll give it a try!
-
rcfastmover, I am upgrading my pc to a windows 10 version and have to start from scratch loading programs as I too had WIN 7. I am a bit nervous based on what is happening to you. Steve, do you have many customers running WIN 10? If so, what version of GIT do you advise? Scott
-
Steve, Thanks. "Auto configure both the GF166's by pressing the NAV button for each device" Please correct me here as I am going from memory here but I believe that when I configure the GF166 a prompt comes up on the screen and asks if I want to go to default settings? Do I click yes? or no... "remove all the events and…
-
Thanks Steve worked like a charm!!!...I have another request please? I wish to configure my 2 GF166's to NAV1 and NAV2 to as close as possible to real KING KX-155's. That being only to use the center button to flip flop the frequencies. However I cannot figure out how to do this....the left and right buttons still are…
-
Thanks Steve will do!!!