admin_pps
Most of the commonly reported issues and questions are answered in the Frequently Asked Questions (FAQ) option under the Support menu of this website.
*** PLEASE NOTE ***
Your forum account is not the same as the account used in the shop. They are completely separate accounts.
Your forum account is not the same as the account used in the shop. They are completely separate accounts.
1st December: A new version of the GoFlight Interface Tool for MSFS is now available.
12th November: A new version of the GoFlight Interface Tool for X-Plane is now available.
6th June: A new version of Virtual Flight Sim Hardware is now available (huge update)
21st November: A new version of the GoFlight Interface Tool for FSX/FSXSE/P3D is now available.
admin_pps
Comments
-
Firstly, you need to make sure you have USB power management turned off. For each USB Hub in Device Manager, on the Power Management tab, make sure "Allow the computer to turn off this device to save power" is NOT ticked. You also need to do this for any GoFlight listed hardware/HID compliant devices where the options is…
-
When did the problem start/what changed on your system?
-
Its called GIT FS2020 Module (If Needed).zip Best wishes Steve
-
Sorry for the late reply. It looks like you are missing the GIT WASM module in your community folder. You can download it from your account and copy the contents including the main folder into your community folder. Best wishes Steve
-
There is a tab called Log in GIT that you can screen dump or copy. Alternatively add /log to the target entry of GIT's icon on your desktop and a log file will be made in Documents\GoFlight Interface Tool. Best wishes Steve
-
Doesn't necessarily mean there is a problem. Please post the GIT log here for me to check. Best wishes Steve
-
Read the IMPORTANT section of the installation guide here: https://www.pollypotsoftware.org.uk/support/user-guide/user-guide-git/16-installation/263-installation-fs2020.html Best wishes Pollypot Software
-
Use a Bespoke Variable for the display which is set via a Start Bespoke Event (continuously runs) which would check the mode variable and set the Bespoke Variable value as applicable. To blank the display, set the Bespoke Variable to some out of range value that would never appear on the aircraft display and configure the…
-
You only need to install the module into the community folder, if a warning during install pops up that the community older could not be found. You do not need FSX/Acceleration. Quick guide for FS2020 here: https://www.pollypotsoftware.org.uk/support/forum.html#/discussion/1436/fs2020-feature-status-and-usage/p1 You do not…
-
Sorry for the late reply, somehow I missed your post. Firstly, you are not losing your programming. Its normal to have to select the device again if you wish to reconfigure it. You can use Detective to see what Datarefs change when you doing something in the virtual cockpit. Datarefs are used for the LED's. You will have…
-
Display Data uses Variables, the Rotary Events uses Events. Events and Variables are completely different things so the lists are different. Best wishes Steve
-
Display Data uses Variables, the Rotary Events uses Events. Events and Variables are completely different things so the lists are different. Best wishes Steve
-
Is there a variable that shows what mode its in?
-
No, its separate software that speeds up downloading by making multiple connections. As ClaudeF, never publish your user key on the forum. Best wishes Steve
-
Thanks for the heads up I have deleted the image.
-
No. I have had to delay it, while I work on updating the website and shop to the latest versions (offline of course) because support is ceasing soon for the versions I use. Its turned out to be a nightmare, but nearly there. Best wishes Steve
-
I don't understand what you are saying. Can you provide some screenshots please? Thx Steve
-
What do you mean by blendout?
-
That is bizarre. What changed? Different aircraft?
-
I have reset your download count. Do not use a download manager as it will make multiple connections and rapidly reduce your download limit. Best wishes Steve
-
Not sure what you saying. Can you provide some screen shots please? Thx Steve
-
No. I could develop a solution for the Mac, but only several people have asked for it in the past, so I do not think the market is there. Best wishes Steve
-
See the last entry in this article: https://shop.pollypotsoftware.org.uk/my-account/need-assistance.html Install instructions: https://www.pollypotsoftware.org.uk/support/user-guide/goflight-interface-tool-x-plane/33-installation/78-installation.html Best wishes Steve
-
If the Events are different you will need to create a Bespoke Event that can determine which Event to send. For example if the EFIS mode is at APP, send Event A, otherwise send Event B. As suggested use "If" or "Case" tasks to do this and assign the single Bespoke Event to the button. Best wishes Steve
-
Yes. However, on some systems there can be a sharing clash with the SimConnect.dll that can be fixed by copying SimConnect.dll into the Engravity CDU PMDG Interface program directory. If you are having other issues than the above, please post in detail what is happening. Best wishes Steve
-
The software was developed and operated on a PC with 16Gb of RAM, so something is wrong else where. I suspect Simconnect cannot be found on your second PC. Is FSX Steam installed on it? You could try copying Microsoft.FlightSimulator.SimConnect.dll from your FSX SE directory\FSX\SDK\Core Utilities Kit\SimConnect…
-
Technically the GoFlight Interface Tool works with all aircraft. However, the available functionality depends upon whether the aircraft developer has built the aircraft so it responds to Simconnect events and variables or exposes lvars and hevents. Searching the forum for Fenix, I found the following post of someone who…
-
Either way will be fine, but if not using GIT you will have to manually configure the reverse buttons on the TQ6 with whatever software you are using to calibrate the TQ6.
-
The reverse thrust issue will be because the TQ6 will need calibrating again, leaving a top and bottom limit so that when throttle down is not at exactly zero, P3D will think it is and the reversers will engage. It may be worth overwriting the new/empty config files with your backup files. This will restore all aircraft…
-
Ok, before we try the backup, lets see if its config file related. Rename Documents\GoFlight Interface Tool to something else and then start GIT. GIT will create new/empty config files. Start P3D and see if the lock up appears.