Most of the commonly reported issues and questions are answered in the Frequently Asked Questions (FAQ) option under the Support menu of this website.
*** PLEASE NOTE ***
Your forum account is not the same as the account used in the shop. They are completely separate accounts.
1st December: A new version of the GoFlight Interface Tool for MSFS is now available.
12th November: A new version of the GoFlight Interface Tool for X-Plane is now available.
6th June: A new version of Virtual Flight Sim Hardware is now available (huge update)
21st November: A new version of the GoFlight Interface Tool for FSX/FSXSE/P3D is now available.

MSFS 2024

2»

Comments

  • RayProudfootRayProudfoot
    @ipearse , you need to wait for a fix from @admin_pps who is currently indisposed after a car accident.

    I trust he won’t mind me saying this but people need reassurance it should be fixed once he’s fit again.
    Cheers,
    Ray (Cheshire, England)
  • ipearseipearse
    OK, many thanks for the update. I will stoke up my patience and hope all is OK.
  • ipearseipearse
    Hi there, any update at all on when the required fix might be forthcoming? I hope admin has recovered from the accident.
  • admin_ppsadmin_pps
    ipearse said:

    Hi there, any update at all on when the required fix might be forthcoming? I hope admin has recovered from the accident.

    Are you referring to your EFIS and MCP not working? Is so, which aircraft are you using it with?

    Best wishes
    Steve
  • ipearseipearse
    admin_pps said:

    ipearse said:

    Hi there, any update at all on when the required fix might be forthcoming? I hope admin has recovered from the accident.

    Are you referring to your EFIS and MCP not working? Is so, which aircraft are you using it with?

    Best wishes
    Steve
    Hi. Yes, the EFIS and MCP Pro not working with the PMDG 737-800. On the EFIS, the mode buttons along the bottom, the VOR/ADF switches, and the Mode and Range rotaries all work fine. However, although the BARO and DH/MDA rotaries seem to do what is required in the sim, the rotation animation does not work. Haven't tried the FPV and MTRS buttons. On the MCP Pro, nothing works at all.
  • admin_ppsadmin_pps
    I cannot do anything about the animation, that's a PMDG issue.

    I need you to confirm the MCP hardware is OK first. This link will allow you to download GoFlights MCP Pro test software https://1drv.ms/u/c/b2564e0413a88ef9/IQD5jqgTBE5WIICyUOsBAAAAAcQUVA9IDDuoNI_-MWaz11c?e=Ule1ck

    Run and test you are getting a response from all buttons and rotaries.

    Best wishes
    Steve
  • ipearseipearse
    Yep, MCP Pro checks out. For info, in MSFS2020, the MCP Pro is the same, but the EFIS actually shows the BARO and DH/MDA knob animations work. For 2024, it is as I described earlier.
  • admin_ppsadmin_pps
    Have you enabled the MCP Pro in the GIT tab with the 737 loaded?
  • ipearseipearse
    admin_pps said:

    Have you enabled the MCP Pro in the GIT tab with the 737 loaded?

    How can I check and make sure that is done? The Status page on the GIT looks OK to me.
  • admin_ppsadmin_pps
    In GIT there is an MCP Pro tab. Select Device 0 in the dropdown and select ENABLED next to it.

    Best wishes
    Steve
  • ipearseipearse
    admin_pps said:

    In GIT there is an MCP Pro tab. Select Device 0 in the dropdown and select ENABLED next to it.

    Best wishes
    Steve

    OK, Device 0 Enabled. The Course, IAS/MACH and Heading windows are showing values, but none of the others, and the rotaries and switched are still not working...a step in the right direction...
  • ipearseipearse
    Finally! Once you'd fixed the account, I managed to download and reinstall the GIT. After the reboot, it all seems to be working now. Phew! Many thanks for your patience and assistance.
  • RayProudfootRayProudfoot
    How do I unsubscribe from this topic please? Nothing is obvious.
    Cheers,
    Ray (Cheshire, England)
Sign In or Register to comment.

© Vanilla Keystone Theme 2026