Louis
Most of the commonly reported issues and questions are answered in the Frequently Asked Questions (FAQ) option under the Support menu of this website.
*** PLEASE NOTE ***
Your forum account is not the same as the account used in the shop. They are completely separate accounts.
Your forum account is not the same as the account used in the shop. They are completely separate accounts.
1st December: A new version of the GoFlight Interface Tool for MSFS is now available.
12th November: A new version of the GoFlight Interface Tool for X-Plane is now available.
6th June: A new version of Virtual Flight Sim Hardware is now available (huge update)
21st November: A new version of the GoFlight Interface Tool for FSX/FSXSE/P3D is now available.
Louis
Comments
-
Ok thanks Steve
-
Still no answer, was sure some one would know . Lots of aircraft like the DC3 don't have a DME . In P3D i had the GF-46 set for DME but in FS2020 it's different and i don't know my way around the settings.
-
Sure glad to see you can assist me in this , I think what some of it is Steve the instructions might be above my head, but here's where I'm at. At the Pete's Dawson's software site I downloaded the GFDEV64.dll version 2.2.8.0 May 05 2022 and put it in the paid version of FSUIPC7 file that is installed in my "C" drive In…
-
Part of me is thinking maybe selling my 12 go flight modules and getting some thing that works, as sad as it is . Can't even get the Advanced Auto pilot to work default . If there were some U tube videos with examples it would be a start . I got the FSUIPC 7 pay version and they see all my modules, it does identify all my…
-
Thanks a pile Steve ,your always there for us ,but I removed p3d completely, and moved to fs2020. I put in the latest 2.28.0 go flight conf tool , its in the control panel but says its not installed . When I open the conf.tool fs2020 is ticked but in the program location box it says' Not Installed 'and i have no idea where…
-
It's OK Steve, I'm all good but they have a good product ,all metal, no plastic and sure wouldn't want to see them abandon ship. Just wondering is all .
-
I'm in Canada Alberta, Mountain time not far from Calgary. UTC -7 ---- I have a GF-48 and i can set the transponder on it and also a ADF freq like maybe 266 works fine .And i have 2 GF's 166, one for com's and one for nav and they seem to work . If i'm landing in Bozman KBZN lets say Run 12 with the freq 109.3 if i look up…
-
Ha aren't you getting brave, yes i just updated it so the pmdg BBJ works. I have the Advanced auto pilot that Go -Flight don't make any more and it works not all too shabby. I think I'm fine there Ron . The T8's i have 2 of them and RP 48's i have 2 also . If i can get the Gyro Pilot flip switch and the flip altitude hold…
-
Oh ok, so I'm not alone. I know Mitch who bought back Go-flight and I'm so glad cause it wasn't run right before and i know John the teck and is real good at customer service but they are closed now. Me and my friend tried following a tutorial on the interface tool but gave up cause it was above our heads, I was hoping…
-
Yes i am Fran, i did what you said and found it -------Thanks
-
Just to make sure with the new version, do we UNinstall the one we have? -or just go ahead and put it in ,cause i'm never comfortable with this as i have all my 9 modules working good and have a fear of wrecking any thing.
-
I check here pretty well daily ,cause i'm not buying the new Xu until its out. Sounds like Pete over at FSUIPC is updating for this aircraft also .
-
Wow sure glad I asked ,oh well I’ll just wait
-
I would also pay - i fly the PMDG 737 every day and the interface tool works . I'm thinking of getting the 777 Pmdg cause i know all my 9 modules will work almost as default they'll just slip right in and work . I kinda was thinking of getting the Dream Liner Quality Wings but because of not sure of setting the interface…
-
Ok , its not a big big problem, i just restart it but yes, lots of windows updates and an other one yesterday , today the tool went fine, i'll check power management settings ----Thanks Steve
-
Umm i vaguely remember him i think .Is he the one that left and got into airplane head phones ?
-
I'm getting same thing and wondering the same , but i just hit the x and the banner goes away and everything still works - so far any way . My version is 3.6.3.1 and i'm always a little leary and just going and up date a lot of this stuff cause every thing is working fine then you update and every thing falls apart . If…
-
Here's what he sent me Steve 09:25:51 GoFlight Connection Starting..... 09:25:51 SimConnect Connection Starting..... 09:25:51 Update Check Error Code: 0 - Exception: The request was aborted: Could not create SSL/TLS secure channel. 09:25:52 SimConnect Message Processing Started 09:25:52 GoFlight Connection Started 09:25:52…
-
His PMDG 777 is up to date, What does he do? -go to Program 86' - Go-Flight folder to GFInstLog and send it ? He will send it to me and i'll post it.
-
Tried that and think your right the Nav radio seems to be ok , so far any way .Pretty well every thing is working like it did .My next one for sure shortly will be the PMDG 777 .Still would like to know how in heck did it sneak every setting over from my back up drive from my "ol rig and set every thing in the new payware…
-
Here's what I did after you wrote about the drivers In Go flight Conf I have Default and PMDG when I opened up PMDG I noticed all my 7 modules of radios, buttons, and switches etc were set same as for General Aircraft ,so I set them all to "No selection" and so far so good . Only problem I have now is in the PMDG interface…
-
Followed what you said and its coming , few things going on - Brakes on and off you can hear the sound but they don't work. the APU I finally got it to work following the tutorial by Chris from Angle of Attack . This one I don't have a clue - I have both rotaries for the IRS on one RP48 and both rotaries for the start…
-
I'll try to explain Brand new computer Have these drives -- Local Disc (C) -- FSX (E) -- Mass(F) Mass(F) is the complete back up of my old computer I bought the Interface tool and downloaded the Go Flight conf.tool last week The payware Interface tool some how imported all the PMDG settings from the Beta PMDG interface…
-
I owe you an apology Steve, looking into it further it wasn't your Interface tool it was the Virtual Avionic Tool, the one where the FMC is on the ipad that was his problem .I do have it but never use it so i don't know what happened.
-
I played with it and got it to save the confuration to the NG.It's slowly coming along. But on an other matter I seen your pictured example of the RTO ---brake selector switch. I have it set just like the example but it don't work on my RP48 for some reason but I'll keep fiddling with it .
-
Ok thought so but I must of did some thing wrong cause I did that and it didn't work -
-
So when I set up every thing with project Magenta which I found in the drop down , is that only for the PMDG cause when I go back and use all my general aircraft I had it all set on the FS default mode.
-
Ok thanks Steve, and don't get me wrong I'm not complain at all just a little lost. I don't know at all what you mean about Project Magenta. . It reads fine with all the general aircraft it's just the PMDG is all and didn't know if I missed a setting or some thing. I'll go to the manual and see the examples , I had seen…