robains
Most of the commonly reported issues and questions are answered in the Frequently Asked Questions (FAQ) option under the Support menu of this website.
*** PLEASE NOTE ***
Your forum account is not the same as the account used in the shop. They are completely separate accounts.
Your forum account is not the same as the account used in the shop. They are completely separate accounts.
1st December: A new version of the GoFlight Interface Tool for MSFS is now available.
12th November: A new version of the GoFlight Interface Tool for X-Plane is now available.
6th June: A new version of Virtual Flight Sim Hardware is now available (huge update)
21st November: A new version of the GoFlight Interface Tool for FSX/FSXSE/P3D is now available.
robains
Comments
-
I did experience the "black screen" that many other 1803 users reported after update, but on just one PC and so far it only happened once ... I just did hard re-boot to recover from it. See article here: https://www.zdnet.com/article/windows-10-april-2018-update-problems-users-struggle-with-mystery-black-screen/ ... not…
-
I should clarify, no issues with XP11.20 or P3D V4.x. Having some really bizarre weather issues with xEnviro 1.09 and XP11.20 ... but that's nothing to do with this topic or GIT and I don't think it's related to 1803 either.
-
No issues so far.
-
Certainly some challenges ... agree, no reason to make your virtual devices look the same as GF devices. Cheers, Rob.
-
Wow, thanks for taking this into consideration ... yeah the 2nd part could also be stepping on GF toes ... unless of course GF went into selling touch screen displays with customized layout ... or have one touch screen device that can be cycled presenting a different module per "page" ... if you look at the retail cost of…
-
Excellent, I'll give that a try. Thank you sir. Cheers, Rob.
-
Excellent, will test it out this weekend. Cheers, Rob.
-
Thanks Steve, I see you've been busy!! Next aircraft on my GIT list is Milviz C310 Redux ... has someone done the Maddog MD-82 for P3D V4?
-
I haven't notice them locking up in P3D V4 side of things using either GIT or just going with GFConfig native ... so far it seems to be XP11 only for lockups and ONLY with the 46's ... the 166's, 48's, MPCPRO, EFIS all working well in XP11.
-
Hi Steve, I tried several values for the write delay this evening and even other settings to see if there was any change, unfortunately nothing seems to work, the 46 would lock up on any rapid forward and then backward rotary movement. If I rotate slowly, everything works fine. The most annoying part of this problem is…
-
I haven't tried using the read/write device delay values, I'll give that a try tonight or tomorrow and see if that helps. Are these values saved per aircraft or global? Is there anything in the USB device descriptions that might provide a clue as to what version of firmware they have? For reference my 166s are relatively…
-
Hi Steve, This is the response I got from Martyn over at JF: "Hi Rob, These are the datarefs for the EGT controls in the Arrow III for XP11: Needle: "sim/cockpit2/engine/indicators/EGT_deg_C[0]" Knob (and red needle): "thranda/electrical/EGT[0]" Thanks Martyn" GIT shows "thranda/electrical/EGT" but it has NO entries for…
-
oops "keep locking..."
-
I got more details from Oleksiy, he indicated the varlist distributed is updated and accurate. To quote Oleksiy: "For example, it is technically impossible for the EFISdata_->EFCP_controls2.button_WXTERR_pressed variable to call the Fuel page My guess would be that the user is not utilizing the synchronization protocol…
-
Alex, thank you for source, I've added their web site to my hardware favorites list ... very interesting. Enjoy!
-
Wow, great work with the overhead, very impressive!! Mind telling me your sources for knobs and switches? Cheers, Rob.
-
Glad you enjoyed the video ... I don't think you need to use LUA for what you are trying to do, but I could be mistaken. I'm a little late on deploying my JF Arrow III files for XP11 ... one DataRef I can't seem to identify, the PEAK EGT dial, everything else is mapped including the GF46 for XPNDR, it was fairly straight…
-
Oleksiy did get back to me, he indicated a couple of possible changes but nothing related to what you listed above. I'll try to get more detail clarification of changes.
-
Oh I see ... yes those fake LVars would have been very handy!! Does the old method still work? I haven't touch Q GIT programming for a while. I fired off an email to Oleksiy and Simeon. I plan to return to the Q GIT programming because the Q has got to be the most performance efficient and feature rich aircraft I have in…
-
Hi Steve, What are "fake Lvars"? Cheers, Rob.
-
I don't have the FF777, but had no problem setting the XPNDR for JF's PA28R that uses a 4 dial .. setup two increment and decrement bespokes, on that increments/decrements by 100 and the other by 1 setting the transponder_code value (Set + and Set -) and assign to the two increment rotary states for GF46. I'm almost done…
-
Thanks Steve, Back in the office ... I'll try some more diagnostics tonight and report back. Cheers, Rob.
-
There is a $60 P3DV4 option ... a lot cheaper than your collection of MCPRO, EFIS, 166, LGTII, G46, G48, T8's, P8's, MESM, TQ6 ;) They're both (XP11/P3D) good, they both require some working to get them to a "good" place. XP11 has a list of essential add-ons just like P3D. I actually think it's a little easier working XP11…
-
Another UPDATE: I can't seem to get the START bespoke to work. I ran a very basic test here: https://drive.google.com/open?id=13vZXlvsvqXR9nJ3Wlvg6scGzYC2H_pC9 and https://drive.google.com/open?id=1Ep3lC46fkRX6si3fms4yg65V8RVYua9U This should have flashed WP-6 button but nothing happened. I went thru all my notes and…
-
UPDATE on issues: 1. GIT 3.5 will require force shutdown in all cases 2. The GIT "restart" button will consistently trigger the flashing cmd window and then become unresponsive 3. Starting GIT after AS CRJ700 is loaded and in "Ready to Taxi" state, turns off the FO/CO MFDs Part 2 of tutorial is posted ... working on START…
-
Hi Steve, In my case, if I start GIT x64 before I start P3D V4.1, I'll get the rapidly flashing cmd window that continues popping up as if it's stuck in a loop and there is no timeout specified. If I start GIT x64 after P3D V4.1 is running (in VC, then I only see the cmd window popup once). On a side note, you might be…
-
Thanks Steve! Cheers, Rob.
-
Hi Steve, 3.4.10.0 is working well, no major issues so far. Really like those new views and the ability just right click to hide and left double click to set the Lvar ... my workflow is so much more efficient now. One quick question, when I export modules and/or bespoke to file, it always defaults to Document folder, is…
-
Hi Steve, I seemed to have reached my download limit? Any chance you can reset this so I can test? Cheers, Rob.
-
Confused, sorting in the bespoke combo in Detective ... after I clicked the check (to add) button (per my video)?