AWE2502
Most of the commonly reported issues and questions are answered in the Frequently Asked Questions (FAQ) option under the Support menu of this website.
*** PLEASE NOTE ***
Your forum account is not the same as the account used in the shop. They are completely separate accounts.
Your forum account is not the same as the account used in the shop. They are completely separate accounts.
1st December: A new version of the GoFlight Interface Tool for MSFS is now available.
12th November: A new version of the GoFlight Interface Tool for X-Plane is now available.
6th June: A new version of Virtual Flight Sim Hardware is now available (huge update)
21st November: A new version of the GoFlight Interface Tool for FSX/FSXSE/P3D is now available.
AWE2502
Comments
-
Just trying to bump this up to see if there are any suggestions. I'm using the RP48 for light control and the EFIS baro knob to change the altimeter. But assigning those functions to a knob will not work. The knobs work other functions if I change them just not the panel brightness, altimeter, and screen display…
-
Did a quick check and everything seems to work properly. Thanks Terry
-
It appears the knobs and button actually work in the PMDG 737, it appears that the displays are not working properly with the buttons or rotary knobs. The GF 166A and GF 46 appear to be unaffected.
-
I am having the same issue, including the T6 switches work the correct items but the led light above the switch will not work any more. As an example, taxi light is on switch 1 when I turn the switch on, the taxi light comes on for the aircraft, and I have the Led above the goflight switch turn on to let me know the switch…
-
figured it out using the events toggled..
-
I have checked, as far as I can see, and can find no reason for the change in the gear function on the PMDG 737u. So I believe that PMDG must have changed something on their end. It is only on the gear retraction function, the function to put the lever in "off" position, and to lower the gear, has remained the same. Terry
-
Hi Steve, I was just about to request some help on this when I saw it here. PMDG must have changed something, the only way it will work is if I hit the "G" key on the keyboard, as the gear raises I lift the LGT lever to up. Once its retracted, I cycle the gear lever on the LGT to down and back up to get it into the off…
-
Okay, thanks, I'll download it and try it out.. Terry
-
Thanks, I run 3.3.0.1 for now. Terry
-
I re-booted and no luck, I re-downloaded from your site and re-installed and still no luck. I re-installed ver 3.3.0.1 and that works the the EFIS knobs. Not sure whats going on. Everything else seems to work fine only the 2 black knobs on the EFIS will not work with the PMDG 737. The buttons work fine and the 2 grey knobs…
-
Okay, I will shut off AVG and install it. Thanks.
-
Thanks Steve, I downloaded the newest version but I am getting a FileRepMalware warning from AVG and it put it in quarantine. I assume it is a false positive but I have never gotten an warning before from any of your past downloads. So I am awaiting to hear from you before I proceed. Thanks, Terry
-
That's okay I will do it...Thank you for the offer..get to bed.. Terry
-
So that has me thinking there is an issue with the MESM... Just thinking since it was the only thing that I changed and for got to return to off when closing FSX.. Terry
-
That did it...PMDG works.. But now I have to re-install all the switch locations and items to make them work..UGH!!!!!!!!! But thanks for coming up with the idea... Any easy way top try and get the info in without have to do each button? Terry
-
Do you want me to do an re-install or just rename the folder and start GFIT?
-
okay let me see what happens..
-
Okay, none of the FAQ's were the issue, what I did find is that the .NET program that was updated due to the new software request was not installed properly. A second try and it worked. So you might add make sure the .NET program is installed on the FAQ page. Also Go Flight released and software update but when I use it,…
-
Yes, I had to go to PMDG and install it like a new aircraft, plus in the PMDG operations center it says all up to date, my current version number for my NGX is 1.10.6436 and states up to date in the operation center. That is how I knew there was an update to the NGX was from the ops center. Now unless I am missing…
-
I have all the up dates to NGX from PMDG and I also have the update from Go-Flight I think is 2.25. When I install the update 2.1.12 all switches work just the displays on the MCPpro and the LED's do not work. All buttons and knobs work the aircraft but just no displays on any goflight equipment. I have tried re installing…
-
Hi Steve, I think you might have some "terry" confusion. There seem to be 2 terry's asking for stuff.. USA2502=Terry is looking for the cluster solution, I only use FSX. I will try to look at the strobe data again to see if I can get it to work. Since the position switch controls the strobe as well. Would the data light be…
-
When I move the switches manually they work. Like you said, when the cluster is programmed both switches move only the left one activates. If I program the switches on buttons, 1 button for each switch they work also. So only in the cluster do they not work, not sure if it is timing? Also I made a mistake and said the taxi…
-
Yes I have the latest updates from PMDG. In fact on the previous version 2.1.10, I saw that the taxi data light not sent the data to turn on the taxi LED, when before it would turn on the strobe LED light. As for not I have returned to the last version 2.1.10, the clusters for the APU BUS don't work but the LED data works…
-
Thanks, Terry
-
Steve, Just a report on the Beta for the 777. Everything worked perfect..!!!!!!! I thought you mentioned that the landing gear status lights did not work. In mine (GF-LGT the older one) they worked just fine, green when down, red when in transition and off when up and locked. Just a few suggestions for guys with few…
-
Steve, It works great, all my current PMDG settings stayed with the new beta...So far I have programmed a few lights and small items. Suggestion. Can you create the landing light as a group function like the switches for the APU and such. The landing lights require 3 different buttons and that eats a lot of switches I…
-
Sorry Steve, I was answering Slayer about my MCPpro and EFIS working...I knew you were working on a fix. Thanks for all you do.. Terry
-
My NGX and MD11, MCPpro and EFIS worked with the with the new BETA fine. The problem i have is that the toggle switches and buttons for the T8, P8, and RP48 lose what I have programmed them to do for both the NGX and MD11. Terry
-
That new BETA works...the MCPpro works as does the EFIS and I have programmed some light buttons...However, the program erased all my buttons I programmed for mt PMDG MD11 and 737NGX. Not sure if there a way just to import those buttons into the new BETA. I saved the old data so I can go back to using the buttons with the…
-
Yes all my set variables, the ones I made such as taxi lights and nav lights and other button and switches were gone.. Anything that had to do with the major hardware such as the EFIS and MCPpro and throttles all worked still. I hope that makes sense? I just copies the saved items back into the c:goflight/"anything"…