AWE2502
Most of the commonly reported issues and questions are answered in the Frequently Asked Questions (FAQ) option under the Support menu of this website.
*** PLEASE NOTE ***
Your forum account is not the same as the account used in the shop. They are completely separate accounts.
Your forum account is not the same as the account used in the shop. They are completely separate accounts.
1st December: A new version of the GoFlight Interface Tool for MSFS is now available.
12th November: A new version of the GoFlight Interface Tool for X-Plane is now available.
6th June: A new version of Virtual Flight Sim Hardware is now available (huge update)
21st November: A new version of the GoFlight Interface Tool for FSX/FSXSE/P3D is now available.
AWE2502
Comments
-
Okay I will try that...I also noticed that when I installed the Beta, it erased all my saved GF variables. So my PMDG 737 and MD11 no longer had any thing that I saved such as taxi and landing lights, strobes and nav lights. All we gone. I did save copies before I down loaded so I was and to get them back. Is there a…
-
I did change the dials from realistic to rotary with no change to the way the MCPpro reacts. The knobs still change the number by 5. I have not touched the 777 because I have been waiting for the GFIT to work with it..So everything is default except for the rotaries which I changed. The knobs on the EFIS work properly just…
-
Yes to both, I downloaded the beta, should I have removed the old one, before I downloaded the beta? The beta seems to have merged with the last GFIT whan I downloaded it, should that not be? The first thing I did when I created a 777 profile in the GF software was to make sure the MCPpro was set to compatible add-on.…
-
Steve, On the MCPpro every knob turn causes the numbers to increase or decrease by 5. So if my headings is 360 and I turn slowly the heading knob clockwise it goes to 005, next turn will be 010. Same with counter-clockwise, and same for all knob functions. Also rapid turn causes a multiple of 5, either direction. Also I…
-
I have alos noticed that when I go to close the GIT program, it will not close and says it stopped responding. I have to click in the X again and then it says force program to close which I select and then it closes. When I go into my task manager it still shows the program running, so I close it in the task manager also.…
-
I don't know how to send just the T-8 commands...they are buried in the XML file with tons of other planes. If you use the detective, and click on each light button it will display what the switch does, then all I did was took that data and put it into the switch. But you prob already knew that.. I don't know if Steve…
-
I do know that the detective does work, I programmed my T-8 to control the lights....I have not started on the EFIS or the MCPpro...yet..... If Steve gets this working, that will be an unbelievable gift... Terry
-
The old one.. Terry
-
My set up is: Intel Core i7 cpu960 @ 3.2ghz, 12 gb ram, nvidia GeForce GTX680 1 of each of the following: GF-lgt GF-WP8 GF-TQ6 GF-MESM GF-P8 GF-RP48 GF-T8-2 GF-46 GF-166A GF-MCPRO GF-EFIS I will email you the files.. Terry
-
Okay more info part 2... I loaded up the NGX and checked all the switches and buttons and they worked fine, I noticed that the GF-46 was frozen. The label on the GF-46 stated XPNR 0000, this is nothing new, usually I just shut down the GIT program and unplug and re-plug in the GF-46 and re-start the software this will…
-
Okay, more info... I tested it with the NGX and everything works fine...I went back to the PMDG MD11 and find that the switch moves and preforms the action fine, the delay is in the data that turns on the LED above the switch. So if I turn on the taxi light, the light on the aircraft works fine, the green LED above the…
-
The slowness is in all switches and buttons(T8, P8 and RP48), the rotaries do not seem to have any problems, they work fine...I have not tried other aircraft yet so I will let you know. But on version 2-0-823-0 the switches and buttons worked perfect. This new download and version 2-0-958-0 both showed the slowness on the…
-
I also have another question...I have not gotten the error, but when using this version and the PMDG MD11, it seems that the switches are a lot slower. What I mean if I can explain it, is that when I flip on a toggle (T-8) to control the taxi lights it takes 2 or 3 times of flipping before the light will activate. The…
-
I have sent you an email with the data. Don't worry about fixing the MD11 data, just look to see why they got erased. I already started to re-write the controls and since I have done it once before it is going quicker. I just want to be sure that when I change to a new version the data is moved over and backed up somehow.…
-
Yep..still have problems.. I renamed the folder in the document section to a .bak and then I copied and moved the config file from ver.538 to the new ver.593. I started FSX and no MD11 controls that I made were there..the downloaded ones were OK and all other planes are OK but no MD11 light controls. I looked back at the…
-
Thanks Steve I will give that a try. As I start to really dive into your program, people just don't know how powerful it really is..If I only new a bit more about programming, but I am learning. That is why it took me so long to get all the lights and panel lights programmed on the MD11.. Thanks for getting back to me..…
-
OK more info.. I have all the A/C back but lost all the events I programmed for the PMDG MD11..I have all the bespokes that were downloaded but lost 8 hours of work on the switches and lights....oh well.. Anyways I don't know why I have any aircraft because I did not copy the config over from the last version. I still…
-
Steve, Yes it originally was the freighter, but I then did the GE version of a passenger but both versions get this pulsing of the buttons. I down loaded the file and imported as the freighter but both version are pulsing with the 3 MCP buttons and 5 efis buttons. I can send you a copy of the config, do you want it email…
-
Steve, I installed the new version of the GFIT, and for some reason the bespoke events, for the MD11, were not there, even thought I copied the old user file and installed it. All the other aircraft were there just not the MD11. So I downloaded the file from the site here and installed them as per the above instruction.…
-
Thanks Steve, Again your product is the best out there.... Terry
-
Did you try the latest version of the Go Flight software 2.23? Terry
-
That worked.....it works great now... Terry
-
I reinstalled the old drivers and the MESM switches were back to switches again and the knobs were back to rotaries. If I go back to the new driver, the MESM goes back to switches being rotaries and knobs being switch positions... I am not sure if you can get to replicate it, try to look at the MESM tab and see if you…
-
No the error message only appeared that one time, but after it was gone so were all the MESM features that were programmed. I expect the error was from the device being changed from a switch to a rotary and a rotary to a switch. The error stated something like" the programmed device will not support the command click OK to…
-
I hav found with QW I left the MCPpro as default in the GoFlight config, that way the buttons worked and the heading bug worked. Other buttons I programmed with the GIT. Hope that helps, if someone has other ideas please chime in.. Terry
-
I did that and it worked, however when I loaded the MCPpro and the EFIS some of the EFIS items came up in the MCPpro buttons, such as auto throttle switch controlled EFIS range and such. I sent you a message and once I hear back I will email you my config to look at. Looking at how your wrote Bspoke events allowed me to…
-
Okay I think I found the problem and so far it is working great, I need to program one set on input to the CS727-200 and then program another set for the CS727-100 and now all work.. I have found that on an certain situations the beacon light and the nav light for the CS727 series fails to stay saved. When I re-open the…
-
Hey Steve, The program is working great, I have finally starting to understand the bespoke commands and the use of the detective and now have gotten all my CS 707, and CS727 to work the the go-flight equipment, your a genius. I do have a 2 small items.. 1. When I go to clear out a module (hitting the red X button) it…
-
I would love to get the MCP pro working for the PMDG MD-11, I have had that aircraft for awhile but don't use it because I have to use the mouse to control everything... Terry
-
Steve, Thanks for the info I will try Did you have to use the custom setting with value 1? Another thing popped up, in my playing around with the program I ran into a small issue. With the CLS A340 I was setting up, I deleted the toggle (T8) settings (the one we were talking about) and went on to something else. However if…