Martin1210
Most of the commonly reported issues and questions are answered in the Frequently Asked Questions (FAQ) option under the Support menu of this website.
*** PLEASE NOTE ***
Your forum account is not the same as the account used in the shop. They are completely separate accounts.
Your forum account is not the same as the account used in the shop. They are completely separate accounts.
1st December: A new version of the GoFlight Interface Tool for MSFS is now available.
12th November: A new version of the GoFlight Interface Tool for X-Plane is now available.
6th June: A new version of Virtual Flight Sim Hardware is now available (huge update)
21st November: A new version of the GoFlight Interface Tool for FSX/FSXSE/P3D is now available.
Martin1210
Comments
-
Hello Steve, back to the Zibo 737. I was able to create bespoke events for all, for me relevant, switches. Only with the strobes I've problems. I added 2 screenshots. There are 6 commands, which change if I set the strobes from STEADY position over OFF position to STEADY & STROBE position. Now I want to put a command to…
-
Hi Steve, tried your commands, but unfortunately there is this problem with the Baro function. At the moment I'm using: Set a320/Panel/EFIS_BaroModeL -1 Sleep 50 Set a320/Panel/EFIS_BaroModeL 0 because if I use this command with GIT, the value EFIS_BaroModeL stays at -1 or 1 instead going back to 0. Therefore I'm using the…
-
Hi Steve, the problem is, that the Baro switch at the EFIS only can be pushed. In the Airbus this knob can be pushed (normal Baro), value a320/Panel/EFIS_BaroModeL 1 and it can be pulled out (STD Baro) a320/Panel/EFIS_BaroModeL -1. Now I want, that if I push the Baro knob at the EFIS this 2 settings change with every push.…
-
Oh, thank you, that works. But I think it is not possible to make a "toggle" function, that first press set to STD and second press to NORM?
-
Ok, Maybe what I'm doing here is not that, what you expect Steve. Left window there is the Dataref a320/Panel/EFIS_BaroModeL. With this, if I pull the Baro knob in the Cockpit of the A320 value -1 is set and it goes back to 0. If I push the knob value 1 is set and goes back to 0. In the right window above I click in the…
-
How can I create a "sleep task". Last moment I postet a question, how I can set the EFIS Baro knob for 2 functions. At press 1 STD and next press Normal Baro. In detective I see, that the value goes to 1 or -1 and freezes there instead of going back to 0. At the moment my biggest problem. Slowly I'm learning bespoke…
-
Hi Steve, I've learned slowly and the next questions popping up. I managed to create a bespoke event for my FF A320 for example. With set+ and value 1.0 I can move the switch up and set- and value 1.0 the switch down. But what can I do, if this switch have 3 positions. How can I move it up or down with one command.…
-
Oh, that I expected. With datarefs I've never worked and I don't understand it, although I've read the userguide several times. With the FF A320 I have the same problem. I'm not able to understand how I add the datarefs to simple switches at my SECM or T8. Not to mention the MCP-Pro. :( Is there an easy and quick example…
-
Ok, power management is disabled under USB-Controller. The ports at the PC are USB 2.0. I'll test with setting 0. Maybe the default values could be the reason? Until a few weeks I had no problems and I started GIT first and then X-Plane. But if I create the route with World Traffic 3 X-Plane hangs a few seconds and then…
-
Hi Steve, my MCP-Pro is A25. Just now I read your info about this behaviour. But why I only have this problem the last months and most time with the Zibo Boeing. With other planes I never had this problem. At the moment I have the standard settings: Write Delay: 10 Cmd Delay: 70 I'll test with write delay 30 and cmd 70.…
-
Hi Paul, you are not alone. I have (had) the same problem sometimes. The MCP Pro is "frozen" (EFIS works) and did not respond if you dial ALT HDG and so on. And this only with the latest version of Zibo B737. Now I found out, that I have to plug out the USB cable and plug it in again. After a restart of GIT the MCP Pro…
-
Any news on this plane? I saw that there are Datarefs available from Flightfactor. Is it now easier to make bespoke events for the A320? Also I want to set the landing lights with my SECM. But the commands I see in X-Plane, I don't find in GIT.
-
In easy words, if I use the same command in X-Plane the CMD A button in the plane moves in and out. The same command with GIT the button don't move (but the setting is ok). Not really a big problem, but interesting what is causing this. Best wishes, Martin
-
Hi David, checked and back again. If I set the CMD A button to my Saitek Throttle button it is the same command (laminar/B738/autopilot/cmd_a_press) If I press this button at my Saitek Throttle the CMD A knob in the plane move in and out. I attached a short video of this. But if I use the same command with the MCP Pro, the…
-
Hi David, if you press the CMD A button at the MCP Pro, does the button in the plane also move in? If I press the MCP Pro button the AP is switched on, but the button in the plane doesn't move. Sorry that this sounds so crazy, I'll try now with RC1.8 and report back. At the beginning of your work for the Zibo B738 I had to…
-
Hi, Merry Xmas! And the digits at the MCP-Pro are working?
-
Hi Steve, the green screen problem is solved. The xjet plugin from Airfoilab was the culprit. Now the screens are ok, but if I import the Zip file with the lvars for MCP-Pro and EFIS at the end there is an error that some function are not found. But my bigger problem is, that the first minutes the MCP-Pro and Efis work…
-
Now I found some versions of the FFA320 Connector, but if I use them the FF A320 doesn't work. The PFD and the other screens are green an I get an error message. Is there anything new information wether FF will make it possible to use GoFlight modules? It's a pity. Regards, Martin
-
The FFA320 Connector isn't available. Is there no chance to use my GF-MCP Pro with the FF A320 Ultimate? Very sad...
-
My goodness, what a solution. Thank you for the golden hint.
-
I testet 3.30b but have also the same problem. IAS shows zero and don't work. EFIS Range selector don't work. Which DREDataRefs.txt and Commands.txt are you using, David?
-
I posted this at https://forums.x-plane.org/index.php?/forums/topic/158055-zibo-330-speedbrake-axis/. Hope this can be fixed asap.
-
Strange, I changed back to 3.29e. With this version all is working without problems.
-
Hi, David, today I downloaded Zibos v3.30 and the IAS and EFIS Range Selector don't work. Could you have a look at this? Thanks, Martin
-
Hello Steve, now it works! Great! :) Many thanks for your great support! Best wishes, Martin
-
Ok, maybe this last missing fix is causing this problem? I also tried deleting the GIT folder in documents an reimporting the Zip file - without luck. The MCP Pro shows "0" at Alt and Hdg. Does it work for you or somebody else? Regards, Martin
-
I'm using GIT 2.0.7.0 which I downloaded today. I use the FF 777 v. 1.9.9. with X-Plane 11.10 b7. I import the Zip file from the download section and after loading the MCP Pro and EFIS doesn't work. Altitude at the MCP-Pro shows "0" and the rotaries don't work. Could someone check this? Regards, Martin
-
Hi Steve, I'm sure this is possible. Could you give me an instruction which events I have to setup therefore? This is my biggest problem. Regards, Martin
-
Hi Steve, thank you very much for your advice. Works great! Best regards, Martin
-
Hi David, now it work fine. It was a problem with the installation. Thank you very much! :) Martin