Martin1210
Most of the commonly reported issues and questions are answered in the Frequently Asked Questions (FAQ) option under the Support menu of this website.
*** PLEASE NOTE ***
Your forum account is not the same as the account used in the shop. They are completely separate accounts.
Your forum account is not the same as the account used in the shop. They are completely separate accounts.
1st December: A new version of the GoFlight Interface Tool for MSFS is now available.
12th November: A new version of the GoFlight Interface Tool for X-Plane is now available.
6th June: A new version of Virtual Flight Sim Hardware is now available (huge update)
21st November: A new version of the GoFlight Interface Tool for FSX/FSXSE/P3D is now available.
Martin1210
Comments
-
Thank you David, how I should import this settings in GIT? Can I also use the B738X 2.98C? Best regards, Martin
-
Hi Steve, now I try to get it working in Detective. I set sim/cockpit2/engine/actuators/ignition_key [0] in detective to a Bespoke Event, but with value 4 the starter also doesn't hold. What I'm making wrong? Found it. Had to set "Set +" in Detective, now it works. :) Martin
-
Hi David, I'll try and have a look if I'm at home. I think the files with the Commands and Datarefs are in the root folder of the B737-800X but GIT does not pick them up. In another thread I read that you made a MCP-Pro config for the B737-800X Zibo mod. Would you share this setup with me and others? Maybe Steve could put…
-
This would be great. At the moment I try to setup the X-Plane 11 B737-800X (Mod by Zibo) http://forums.x-plane.org/index.php?/forums/topic/111305-boeing-b738-800-modified/ for the MCP-Pro and EFIS. Unfortunately I can not find the commands. There should be a "laminar/B738/autopilot/autothrottle_arm_toggle" and I can't find…
-
Hi Steve, where I find sim/cockpit2/engine/actuators/? Can't find it at the Input Event list. Regards, Martin
-
Hi Steve, thank you for your help. Meanwhile I found the solution. I had to delete the standard settings of the RP48 and then set the new commands. Now it works. One thing would be great in a new version of GIT. If I want to set a new command to a button or knob, I have to scroll down the whole datarefs. Maybe there is…
-
Hi Steve, I forgot to mention that this problem also occurs with the "Standard" C172 from X-Plane. One thing also is interesting. Before I bought GIT for X-Plane I tested the freeware tool "XGoFlight" from X-Plane.org. This tool is from 2013 and there the starter for the XP11 C172 and the Airfoil C172 works without…
-
Hi, now I tried to setup the starter of the Airfoil C172 in XP11. How to set the magnetos is clear. But if I set "sim/starter/engage_starter_1" there is no function which holds the starter in start position. Everytime I toggle the rotary of my SECM the starter in the plane goes to start position and snap back to both. If I…
-
Hi Steve, I have no idea how to find and work with the datarefs in X-Plane 11. I'll check your links and try to learn a few things. Unfortunately I have so less time, that I can not fly if I'm searching/learning to program those settings. Therefore I asked in another thread for settings of the SMS Beaver. Maybe you made…
-
Maybe with the final XP11 version there will be a new Any-Aircraft.xml for the standard planes? At the moment I've big problems because I switched from P3Dv3 to XP11. Is there a tutorial to make custom settings in XP11 with GIT? For example I want to turn the starter switch at the default C172 with GIT and the SECM. At the…
-
Oh, I thought the standard planes would work "out of the box" with GIT for X-Plane like they did in P3Dv3. But I will wait until X-Plane 11 is out of beta. At the moment I'm happy to understand the basics of X-Plane. Datarefs I only saw in the settings, don't know what they do. Martin
-
Thank you Steve, another question from a new X-Plane User with GF Modules. Is it normal that in XP the MCP-Pro Altitude digits count up in 10 steps instead of 100 in P3D. If I set 2000 ft and acivate the Autopilot the MCP-Pro shows 2090 ft. Maybe an XP 11 bug. Also the Starter switch at the SECM only switch the default…
-
Hi Steve, renaming and reimport is ok, but there is one problem I notice again. I must load the Dash direct without loading another aircraft before. If I load a standard flight with a P3D plane and then the Dash I get those failures "The Event "MJC_ADC_BARO_L_CW" has Errored. and this message I have to click "Ok" for every…
-
Hi Steve, sorry, it's me again. A few months ago I had problems with the MJC Dash. Until yesterday all was ok. I've nothing installed the last days. The only thing I remember was a flight, I quit because I couldn't move the gear up. This was a failure of the Dash. The only thing I did, was to change the cockpit state at…
-
Hi Steve, I missed this option. Thank you, best wishes Martin
-
Hi, I'm running P3Dv3.4.9 and the latest GoFlight drivers and GIT. After a while I wanted to fly the PMDG 737NGX (also latest version) and everytime I start GIT I become the same message "Prepar3d ini file not found, pmdg options file cannot be checked/updated". If I click "OK" the MCP Pro works without problems. Any ideas…
-
If I import the MCPPRO.xml again, all digits at the MCPPRO are working correctly.
-
Yes Steve, I meant the heading on the MCP counts up by 10 and reaches values above 360 degrees. Sorry about this misunderstanding. If I start P3D and load the Dash and then start GIT my only problem is, that the MCPPRO digits for HDG and both Course are showing 360 and if I turn the MCPPRO CW the value at the MCPPRO…
-
Yes, but I must load MJC directly. If I load any other plane and then MJC I get those errors. It's horrible to click "Ok" for each Bespoke event error. One thing I haven't tried is to disable my anti-virus, but then I would have this problem with the other profiles too...
-
As Steve (Slayer) wrote, I've made a screenshot my Win10 Pro (German) Keyboard setting.
-
Good morning, just want to say that I'm using the MJC Dash Pro Edition v1.018c. Yesterday I made another test. If I start P3D, load the default flight, start GIT and switch to the Dash I get those errors for every bespoke event. I posted one of those error screenshot above. At this moment I have to click the OK button for…
-
Ok Steve, the mail at the forum account is ok. I'll wait for you information. Now I'm off the computer and go to sleep. Best wishes and good night, Martin
-
Hi Steve, this is ok. Normally I use Teamviewer for remote control. Sunday would be fine. Do you have my mailadress? Best wishes Martin
-
Sorry, I mean that I import the profile data from the MCPPRO and it works. If I quit GIT and start it again, it doesn't work. If I import the MCPPRO profile data again, it works. And this problem only occurs with the Dash. With the PMDG 737, 777, A2A C182 I have not those problems. I only import the profile data once and…
-
No this happens only with the Dash. With the A2A Cessnas I have no problems.
-
Did so and installed into C:\Goflight. Same situation. GIT have amnesia and did not save the imported profile data from MCPPRO.
-
Did so, same situation. GIT have amnesia and did not save the MCPPRO data...
-
The same also after deleting the GIT folder in documents and a new import of the profile. Also I quit GIT correct. (but doesn't closed P3D with the running Dash). If I start GIT again, the problems are there.
-
Ok, I tested and it doesn't work. If I turn the HDG rotary the values in the Dash Cockpit are ok, only the values at the MCPPRO doesn't work correct.
-
Hi Steve, do you mean, I should install the Goflight drive into C:\Goflight and GIT also in the same directory? The setup from GIT wants to install to C:\GoFlight\Goflight...? Now I install GIT into the same directory and will test.