Avatar

Dutchdc3

Most of the commonly reported issues and questions are answered in the Frequently Asked Questions (FAQ) option under the Support menu of this website.
*** PLEASE NOTE ***
Your forum account is not the same as the account used in the shop. They are completely separate accounts.
1st December: A new version of the GoFlight Interface Tool for MSFS is now available.
12th November: A new version of the GoFlight Interface Tool for X-Plane is now available.
6th June: A new version of Virtual Flight Sim Hardware is now available (huge update)
21st November: A new version of the GoFlight Interface Tool for FSX/FSXSE/P3D is now available.

Dutchdc3

Comments

  • Has Pollypot "Left The Building"? I would have at least expected some sort of notification in regards to FS2024 by now.
  • Would like t know as well.
  • Thanks for the update, Steve. Same here.
  • I can confirm running into the same issue. Even tried with a fully clean install after deleting the GIT software, plugin and deleting the Documents/Goflight Interface Tool folder. (yes, I rebooted the PC before installing the clean version. Is still working fine in my XP 12.09 after the re-install.
  • Steve, Great job on the 3 decimal update for the GF166. One time click on the COM button, hit OK on the pop-up and we have 3 digit COM frequencies without loosing the currently active profile. So far only made the transition for the ZiboMod B738X, but it was a breeze. Now I can update my other airplanes without any worries.
  • If you are still experiencing the same issue: It's a issue with how you have configured the disconnect AP or Throttle. I am having no issues all the way through XP 12 Full Release and Zibo EA 2.3
  • It has been like that for me for a few years now. So I got used to closing GIT b4 I close X-Plane ;) But thanks for letting us know the plugin seems to be resolving the CTD and allow you to get your modules to work. That means I'll be testing it myself this evening after work, YAHOO!!
  • Thank you for the update and clarification, Steve. I hope Austin and his team fixes the issue soon.
  • Error in log file shows Violation by GoFlight Interface Plugin (xplanesdk.examples.DataRefEditor - E:\X-Plane 12\Resources\plugins\GIT Plugin\64\win.xpl) But I don't have DataRefEditor. Never used it, nor is it currently installed (Don't even have it downloaded).
  • Same issue here. XP12 CTD as soon as I launch GIT. Don't use Dataref Editor.
  • X-Plane 12 Early Access has been released. I hope GIT will be updated soon. Or is it supposed to work already?
  • Hello, I don't check this forum frequently so didn't see the requests for my file. @JacquesOziel and @alaeddin1965 I sent you both the file, even though I'm not sure if you still needed it. For others requesting my file, please send me a PM.
  • I can confirm the PMGD 3.0.24 broke the functionality of the displays of the MCP Pro. Buttons buttons/rotaries on the MCP Pro and all other modules (GF-166, GF-45 and EFIS) are working fine. Displays on MCP Pro show 0.00 and 257. Displays on radio panels working just fine.
  • Both @new4xxx and @pablomas5 have received the config files.
  • I do use Vulkan, but will have a look at the Update On Flight loop Thx for your reply
  • I know this is an old thread, but by using it I keep all FF757 related issues centralized, zo please forgive me. I am using the latest GIT for my MCPPro, EFIS, 2x GF-166 and a GF46. When I have the FF757-200 v2 loaded the sim crashes when doing anything in GIT. Whether it is attempting to import a profile, or just…
  • @new4xxx and @pablomas5 I sent you both a msg
  • Okay, I finally got the Range and Mode Selector knobs to work. Took some "Detective" work. For some reason, importing the Zibo config .zip file through the Wizard, would not import the Bespoke events, which caused the two knobs not to work. After manually re-creating the Bespoke events in "Detective", I got the LevelUp…
  • I got all the modules fully functional with the LevelUp 737, except for the Range and mode selector knobs on the EFIS. Not giving up an those though.
  • I used the config file available for the ZiboMod, and got GF166, GF45 and MCPPro to work. Need some adjustments for some of the MCPpro and EFIS functions, but am at least getting closer to getting everything working correctly. Next step will be to export MCPPRO and EFIS configuration while the Zibo is loaded, and then load…
  • I am experiencing the same issue with the Rotate MD-80. Is there any update on this issue? Windows 10 20H2 X-Plane 11.51 MD-80 version 1.43r3 GIT version 2.0.16.3
  • What @RayProudfoot suggested is exactly what I did a few months ago. My 1 year old computer has USB 3 and USB 3.1 ports. Using a USB 2.0 self powered hub connected to a USB 3.0 port got my two GF-166's as well as my GF-45 working just fine, but the MCP PRO and EFIS would not work properly (intermittent) while connected to…
  • Thanks, I replied to your PM.
  • Did you ever upload the file? I just purchased teh Rotate MD-80 Pro, and would love to use your file to make my MCP-Pro work with it.
  • Latest update: GoFlight has reset my registration count after I sent them an email. Quick and painless. Thanks for that. Now to my original issue; the controllers freezing as soon as GIT for X-Plane is loaded. Since the issue started after I replaced my CPU/Mobo and RAM, I started wondering if the USB 2.0 connections on…
  • Oh, and now I have exceeded to count of registrations :(
  • Okay, here is an update. I spent all day, starting with; -a clean install of Windows 10, and updating it tp version 1909. - updated all motherboard drivers. - installed vc++ re-dist. - Performed a clean install of X-Plane 11, version 11.4 Then I downloaded and installed the latest version of GIT in a new location on a…
  • So, I have been working in this issue some more. Even when loading only the GIT, with X-plane not running, All mouse and keyboard actions stop working. Can not even get to the Task Manager. I know that it is only the mouse and keyboard controls that are affected, as I do see ground vehicles move around in X-Plane if I have…
  • That did not resolve the issue. I did find out that, with multi monitor setup, all works well if GIT loads on a different monitor than where X-Plane is running. Wondering is something changed in Windows10 that caused the issue, as it started happening after the previous Windows update.
  • Yahoo!! Issue resolved. I deleted the complete B737-800X folder from X-plane as well as the downloaded zip files. Downloaded new zip files for 3.30b c d and e. Extracted 3.30b and renamed the folder to 737-800X. Then I extracted and merged each fix one at a time. What I noticed was that when merging the 3.30e fix, it would…