gkraft
Most of the commonly reported issues and questions are answered in the Frequently Asked Questions (FAQ) option under the Support menu of this website.
*** PLEASE NOTE ***
Your forum account is not the same as the account used in the shop. They are completely separate accounts.
Your forum account is not the same as the account used in the shop. They are completely separate accounts.
1st December: A new version of the GoFlight Interface Tool for MSFS is now available.
12th November: A new version of the GoFlight Interface Tool for X-Plane is now available.
6th June: A new version of Virtual Flight Sim Hardware is now available (huge update)
21st November: A new version of the GoFlight Interface Tool for FSX/FSXSE/P3D is now available.
gkraft
Comments
-
Hi Steve NOT for setting the ignition switch to ON. When switching back to OFF DETECTIVE shows the Ignition Switch event and a Ignition Switch toggle event. I rebuilt both situations shown by DETECTIVE, but nothing happening. regards Georg
-
Hi Steve! WOW THX! What a great recommendation. I installed the XML plugin into my Notepad++ and now I can see everything what I have been looking for ! ! ! Also congratulation to GIT ! ! ! I like this tool and its flexibility! I now programmed an engine startup sequence for the Blacksquare Turbine Duke to the GoFlight…
-
THX Steve, I' ll try tonight! But basically the way to do engineering by editing xml files should work? regards Georg
-
Hello Steve again, I thought I could save sme time by editing GIT XML-Files, which are very easy structured. I did it on backup files and found out, that I destroyed the files. Could this be an issue of coding? I am using notepad++ in it's default settings, which is UTF-8 or are there some special rules I have to observe…
-
Good morning Steve, THX, many helpful information!
-
Hi Steve, thx for your quick response. YES, the backups in the meantime reflect the damaged situation. Regarding the backups, are they made automatically or can I schedule them? Where can I find the LOG-file and how can I send it? Georg
-
THX a lot
-
Sorry for my wrong question! I am lookoing for an explanation Bespoke Vars like listed under BESVAR e.g. Bespoke Var 82 and so on! THX
-
Hi Steve! THX a lot a great document. I didn't know this. regards Georg
-
Hi Steve! Yes the joystick works OK before activating the autopilot. But forget about this issue. I solved the Problem. I replaced my Logitech Attack3 joystick by my PFC Yoke and this works fine. Seems to be something related to the Logitech Joystick. regards Georg
-
THX again Steve ! :) I had lot of problems installing and beginning to use GIT but in the meantime I realized great configs for my PMDGs and also great "LUAs"! I LIKE GIT64 ! ! ! regards Georg :D
-
THX again for explanation!
-
THX for explanation! I' ll try. Regards Georg
-
Thx for explanation! Everything is working fine now with EFIS and MCPpro. I now ran into troubles with TQ6. When I move Axis D (thrust engine 2) to max the view changes like it does when I press letter "S" on the keyboard. GF Config does not make any assignements to the device. FSUIPC also does not touch the device, just…
-
Hi Steve again! GIT is now working but I have one problem on GoFlight MCPPRO. All displays, except the VERTICAL SPEED, are indicating and working fine. The rotary selector does not change values in the PMDGaircraft and the display on MCPPRO for the vertical speed stays dark. What to do? Georg
-
Hello Steve! First of all many, many thanks for your brilliant support! Finally I did it! In my case it wasn't a problem of software it was the USB hub I use. I stopped trying and trying an trying and came back to systematic testing. - I deinstalled GFConfig and GIT - I disconnected all hardware - I reinstalled GFconfig…
-
14:43:08 GoFlight Connection Starting..... 14:43:08 SimConnect Connection Starting..... 14:43:09 SimConnect Message Processing Started 14:43:09 GoFlight Worker Thread Failed: Die Eingabezeichenfolge hat das falsche Format. 14:43:10 SimConnect Connection Started 14:43:10 Aircraft Connection Starting..... 14:43:10 PMDG SDK…
-
Hi Steve! No chance to get GIT working. Could you provide GF Config 2.26 or GF Config 2.25. Lots of people having my problem recommend to try older versions. GF Config recognizes all my GF modules correct and lets me configure them but I would like to bring MCPPRO and EFIS back to work with PMDG. regards Georg
-
Hi Steve! Today I tried to register GFDev.dll and I got a RegSvr32 error. I'll translate because it came in german language. The module GFDev.dll has been loaded butthe Dll Register Server Entrypoint could not be found. Please make sure that GFDev.dll is a valid .Dll or OCX file and try again! How can I find out if my…
-
... and GIT did not ask for a license after deinstallation and reinstallation. Georg
-
Hello Steve Now I am definitly out of ideas! I deinstalled GFConfig and GIT and reinstalled it at C:\Program Files (X86). The only thing, which changed; when starting GIT without P3D running the GoFlight LED now stays GREY does not turn to RED. It still freezes immeditely after GIT window popping up. Georg
-
I started testing with path: default and then changed to path: D:\Flight\Goflight
-
LUA Config.txt hostname: localhost port: 27015 portms2020: 27016 path: D:\Flight\GoFlight luatimeout: 500 luahookcount: 3
-
Emoji is letter d
-
I don't have a directory C:\Program Files (x86)\GoFlight or C:\Program Files\GoFlight because I installed everything, which is for flightsimming on drive D: So I have D:\Flight\GoFlight and GFconfog, GIT and the GFDev.dll are in there.
-
Check C:\Users\\AppData\Roaming\Lockheed Martin\Prepar3d v4\dll.xml has only 1 entry similar to the following: dll is in the correct directory and has the requested entry…
-
Hi Steve! Any additional idea to the GoFlight Worker Thread error? regards Georg
-
Hi Steve, I deinstalled 32bit version again and redownloaded and reinstalled. 32bit version starts now without informing about a new version and the rest is the same as I wrote together with my screenshots, Without P3dv4.5 running 32bit verison starts and freezes With P3D v4.5 32bit version comes up opens the white P3D…
-
Hi Steve, I guess I will finish for today. Many thx so far. Could you please refill my download counts for GIT and my Engravity CDU Interface, which works pretty fine in windows11. regards Georg Kraft
-
I deinstalled everything, redownloaded 32bit version and installed. After installation from scratch it still says " A NEw Version is Available! I installed the 32bit version but in the installation directory I do have a GITModule64.dll. This 64 dll is version 3.7.0.0. Georg